Dahua DHI-VTO2111D-P-S2 IP Villa Door-Station True-Tech The Dahua DHI-VTO2111D-P-S2 IP Villa Door-Station has High definition camera; WDR. In addition it has a wide operating temperature -30°C–60°C. Product description The Dahua DHI-VTO2111D-P-S2 IP Villa Door-Station has System Main Processor Embedded processor Operating System Embedded LINUX operating system ButtonType Mechanical Interoperability ONVIF Internet Protocol SIP; P2P; IPv4; DNS; RTSP; RTP; TCP; UDP Basic Camera 1/4″ 1MP CMOS high definition, low illumination/WDR, color System Main Processor Embedded processor Operating System Embedded LINUX operating system Button Type Mechanical Interoperability ONVIF Internet Protocol SIP; P2P; IPv4; DNS; RTSP; RTP; TCP; UDP Basic Camera 1/4″ 1MP CMOS high definition, low illumination/WDR, color/IR Angle of View Horizontal: 107°; vertical: 61°; diagonal: 122° WDR 120dB Noise Reduction 3D noise reduction Video Compression H.264 Video Resolution Main stream: WVGA, 720P, D1 Sub stream: CIF, WVGA, QVGA, 1080P, D1 Frame Rate PAL: 25 fps NTSC: 30 fps Video Bit Rate 256K to 4M Light Compensation Auto IR D/N ICR auto switch Audio Compression G.711a; G.711u; PCM Audio Input 1 Audio Output Built-in speaker Audio Mode Two-way voice call Audio Enhancement Echo suppression and cancellation/digital noise reduction Audio Bit Rate 16KHz, 16Bit Function Communication Full digital Unlock Mode Card/App remote/indoor monitor unlock Card Type IC card Motion Detection Video motion detection Auto Snapshot Auto snapshot can only be enabled on indoor monitors Leave Photos and Messages Yes (Insert an SD card into the indoor monitor.) Web Configuration Yes Performance Card Reading Distance 3cm–5cm Casing PC Acrylic Capacity Card 10,000 Port RS-485 1 Electric Lock 1 Exit Button 1 Door Status Detection 1 Lock Control 1, normally closed by default Network 1 10Mbps/100Mbps network port (8-core white ribbon cable) Alarm Tamper Yes General Color Black Power Supply Mode 12V DC 1A Standard PoE Installation Surface mount Certifications CE FCC UL Accessory Brackets and alarm ribbon cable Dimensions 135mm×70.4mm×34.4mm (5.31″×2.77″×1.35″) Protection Grade IP65 (silicone sealant is needed, see the quick start guide) Operating Temperature -30°C to 60°C (-20°F to 60°F ) Operating Humidity 10%RH–90%RH (non-condensing) Operating Altitude Beneath 3000 m (9842.52 ft) Power Consumption Standby≤1W, working≤5W Gross Weight 326 g (0.72 lb)
